Application:
Work independently

• High efficiency thanks to brushless motor
• Handy, short and lightweight tool
• Basic unit Mini cordless impact wrench set, without battery
• There are three power stages to choose from for torque acceleration
  Stage 1: approx. 80 Nm at 700 rpm
  Stage 2: approx. 150 Nm at 1600 rpm
  Stage 3: approx. 220 Nm at 2500 rpm
• Amperage without load: 4.5 A
• Charging time ~ 35 minutes
• Brushless DC motor (BLDC):
  • Longer service life, less wear, no need to change the carbon brushes
  • High efficiency and hence less battery consumption
  • More compact motor enables smaller dimensions
• Illumination of the work area before the output begins to move
• Li-ion battery with very low self-discharge (only 2%) compared to a standard NiMH battery (15 - 25%)
• Net weight: 0.954 kg (without battery pack)
• Battery net weight: 0.365 kg
• Battery charger net weight: 0.66 kg
• Dimensions including rechargeable battery: 228 x 63 x 135 mm
• Including belt clip, attachable on both sides, and hand strap
• Recommended torque: 220 Nm
• Sound power level: 110.6 db(A) Lp W
• Vibration acceleration: 15.40 m/s2
• Loosening torque (max) determined with screw size M: 16
• Output: Square, solid 12.5 mm (1/2 inch)
• Net weight: 0.95 kg
• Tightening torque max.: 220 Nm
• Maximum loosening torque: 270 Nm
• Sound pressure level: 99.6 dB(A) Lp A
• Revolutions per minute: 0 – 2500

Do you know – Li-Ion batteries:

• Do not have any memory effect
• Consist of cells with 3.6 V each
• After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
  Attention: For a longer lifetime of the battery please store it charged up to 50 to 80 % only
• Have an energy density which is twice as high as nickel cadmium batteries, for example
• Have a nominal voltage three times higher than a nickel metal hydride battery
• Require multiple complete charging cycles to reach full capacity