Application:
Work independently
- High efficiency thanks to brushless motor
- Handy, short and lightweight tool
-
4-piece set, contents:
cordless impact wrench, battery charger, Li-ion battery 9212-02 (2x)
- There are three power stages to choose from for torque acceleration
Stage 1: approx. 80 Nm at 700 rpm
Stage 2: approx. 150 Nm at 1600 rpm
Stage 3: approx. 220 Nm at 2500 rpm
- Amperage without load: 4.5 A
- Charging time ~ 35 minutes
-
Brushless DC motor (BLDC):
- Longer service life, less wear, no need to change the carbon brushes
- High efficiency and hence less battery consumption
- More compact motor enables smaller dimensions
- Illumination of the work area before the output begins to move
- Li-ion battery with very low self-discharge (only 2%) compared to a standard NiMH battery (15 - 25%)
- Net weight: 0.954 kg (without battery pack)
- Battery net weight: 0.365 kg
- Battery charger net weight: 0.66 kg
- Dimensions including rechargeable battery: 228 x 63 x 135 mm
- Including belt clip, attachable on both sides, and hand strap
- Recommended torque: 220 Nm
- Sound power level: 110.6 db(A) Lp W
- Vibration acceleration: 15.40 m/s2
- Loosening torque (max) determined with screw size M: 16
- Plastic roll
- Output: Square, solid 12.5 mm (1/2 inch)
- Tightening torque max.: 220 Nm
- Maximum loosening torque: 270 Nm
- Sound pressure level: 99.6 dB(A) Lp A
- Revolutions per minute: 0 – 2500
Do you know – Li-Ion batteries:
- Do not have any memory effect
- Consist of cells with 3.6 V each
- After full charge they have a higher voltage than 3.6 V i.e. 5 cells each 3.6 V = 18 V – but after full charge a peak voltage of up to 20 V is possible
Attention: For a longer lifetime of the battery please store it charged up to 50 to 80 % only
- Have an energy density which is twice as high as nickel cadmium batteries, for example
- Have a nominal voltage three times higher than a nickel metal hydride battery
- Require multiple complete charging cycles to reach full capacity
- Number of tools: 4